------------------------------------------------------------------------------- ATI Fire GL 8800/8700 Graphics Accelerator ATI Fire GL Video Driver for Windows 2000 Windows 2000 Driver Version 5.12.2195.3051 ------------------------------------------------------------------------------- Please read the entire contents of this document. Information in this file may not appear in printed documentation or online help. NOTES: (1) The term 'Fire GL' used in this document refers to the following graphics accelerators: Fire GL 8800, Fire GL 8700 (2) Fire GL 8800 provides VGA + DVI-I (digital/analog) monitor connectors, Fire GL 8700 provides VGA + DVI-D (digital-only) monitor connectors This READ-ME file contains the following information: 1. GENERAL INFORMATION 1.1 Installing the Fire GL Graphics Accelerator 2. INSTALLING THE Fire GL VIDEO DRIVER 2.1 Installing the Fire GL Video Driver with the ATI Fire GL CD 2.2 Installing Fire GL Video Drivers downloaded from the ATI Fire GL Website 3. CHANGING THE VIDEO SETTINGS 3.1 Setting the Resolution and Refresh Rate 3.2 Setting a DualScreen Configuration 3.3 Selecting your Monitor 3.4 Adjusting the Monitor's Display 4. UNINSTALLING THE Fire GL VIDEO DRIVER 5. CONFIGURATION FEATURES AND INFORMATION 5.1 Information Dialog 5.2 Configuration Menu (for experienced users only!) 6. SERVICE, SUPPORT, AND SOFTWARE UPGRADES 7. SUPPORTED RESOLUTIONS, COLOR DEPTHS, AND REFRESH RATES 1. GENERAL INFORMATION ---------------------- 1.1 Installing the Fire GL Graphics Accelerator ------------------------------------------------------------- Refer to the User's Guide of your computer to install the Fire GL Graphics Accelerator in your system. NOTES: (1) If you want to install the Fire GL card to replace your existing graphics solution it may be helpful to set your display driver to standard VGA (Windows NT4.0 only) before you shut down your PC and remove a previously installed card. (2) Fire GL 8700: You may connect two monitors: - analog VGA (to the VGA connector), and - digital CRT / DFP (to the DVI-D connector) The Fire GL 8700 does not support two VGA monitors connected to the card. Fire GL 8800: You may connect two monitors: - analog VGA (to the VGA connector), plus - digital CRT / DFP monitors (to the DVI-I connector), or - analog VGA (to the DVI-I connector via the provided DVI-to-VGA adapter) (4) The drivers are designed exclusively to support the Fire GL Graphics Accelerators with the Windows NT 4.0/Windows 2000/ Windows XP operating system. The drivers DO NOT SUPPORT any other type or brand of graphics card or operating system. 2. INSTALLING THE Fire GL VIDEO DRIVER --------------------------------------- You need to install the basic driver software for Windows NT/Windows 2000/ Windows XP - if you install the card to your system - if you are re-installing or upgrading the operating system. IMPORTANT: You must have Microsoft Windows NT w/Service Pack 5, Windows XP or Windows 2000 w/Service Pack 1 installed prior to installing the Fire GL drivers. The Service Pack is available from Microsoft's web page, www.microsoft.com. To install or uninstall the Fire GL drivers, you need administrator rights or you must be logged on as a user with administrator rights under Windows. NOTE: Before installing the Fire GL video driver, please close all open application programs and disable any anti-virus software that is running on your computer until the driver installation is complete! 2.1 Installing the Fire GL Video Driver with the ATI Fire GL CD ---------------------------------------------------------------- Note for Windows 2000 / Windows XP: When the 'Found New Hardware Wizard' comes up, click 'Cancel.' When the 'System Settings Change' windows asks you to restart your computer, click 'No.' 1. Click the 'Start' button in the task bar, click 'Run' and then select 'Start.exe' from the root directory of the ATI FIre GL CD. 2. Click 'Start Installation'. 3. Click the button corresponding to the type of installation you want. If you select 'Custom', a list of software components will be displayed. Select the check boxes to specify the components you want to install. 4. Click 'Next' to continue the installation. 5. When the ATI Fire GL Install dialog displays the components to be installed click on 'Next'. (Depending on which components you chose different windows might appear. Click on the corresponding buttons to continue with the installation.) 6. When the 'INSTALLATION COMPLETE' message appears click 'Next'. This will restart your computer. Note for Windows 2000/Windows XP: After Windows reboots, the 'Found New Hardware' message displays. The 'Digital Signature Not Found' dialog prompts you 'Do you want to continue the installation?'. Click 'Yes' to install and start the drivers. 7. Click Start > Settings > Control Panel > Display > Settings, or right-click on the Windows desktop, and select 'Properties' and 'Settings'. 8. Set the resolution, color depth and (NT4.0) refresh rate that best suit your requirements and your monitor's performance. NOTE: The resolution setting applies to both monitors if you have two monitors connected to the Fire GL. 9. Click OK. !!!WARNING!!! Selecting a resolution or refresh rate that your monitor does not support can permanently damage the monitor. Check the documentation of your monitor and make sure that the monitor supports the selected resolution and refresh rate. 2.2 Installing Fire GL Video Drivers downloaded from the ATI Fire GL Website -------------------------------------------- IMPORTANT: You must have Microsoft Windows NT w/Service Pack 5, Windows 2000 w/Service Pack 1 or Windows XP installed prior to installing the Fire GL drivers. The Service Packs are available from Microsoft's web page, www.microsoft.com. To install the video drivers: run the executable (*.exe) file that came with the download and follow the instructions on the screen. 3. CHANGING THE VIDEO SETTINGS ------------------------------ The following dialogs in the 'Display Properties' menu allow setting and adjusting the video settings to suit your requirements best. - Windows NT 4.0 Settings: set resolution, color depth and display refresh rate Monitor: choose monitors, set refresh rate for second monitor DualScreen: set up a two-monitor desktop configuration Adjustment: adjust the monitors' display - Windows 2000 / Windows XP Settings: set resolution and color depth Settings/Advanced/(Windows)Monitor: choose monitors and display refresh rates Settings/Advanced/ATI Monitor: (not active, if you have only one monitor connected): choose monitors, set refresh rate for second monitor Settings/Advanced/DualScreen: set up a two-monitor desktop configuration Settings/Advanced/Adjustment: adjust the monitor's display - To access the 'Display Properties' menu: 1. Start Windows 2. After Windows has finished starting, click on the START button, select 'Settings,' and then click on 'Control Panel.' 3. Double-click on the 'Display' icon. The 'Display Properties' window appears. Note: You can also display the 'Display Properties' window by right-clicking the Windows Desktop background and then selecting the 'Properties' option from the pop-up menu. 3.1 Setting the Resolution and Refresh Rate -------------------------------------------- - Windows NT 4.0 Select the 'Settings' dialog in the 'Display Properties' window. Set the resolution (Desktop Area), Color Palette and Refresh Frequeny that best suit your requirements and your monitor's performance. NOTE: The resolution setting applies to both monitors, if you have two monitors connected to the card. - Windows 2000 / Windows XP Select the 'Settings' dialog in the 'Display Properties' window. Set the resolution (Screen area) and Colors that best suit your requirements and your monitors' performance. Select the 'Windows Monitor' dialog via Display Properties > Settings > Advanced > (Windows)Monitor. Select the refresh rate from the Refresh Frequency box. If you have two monitors connected, the refresh rate setting applies to the monitor connected to the VGA connector. Use the ATI Monitor dialog to set the refresh rate of the second monitor. Refer to your Windows online help and documentation for further information on using the 'Settings' dialog. NOTES: (1) Check the documentation of your monitor and make sure it supports the resolution/refresh rate setting. (2) Use the 'DualScreen' dialog (see 3.2) to set up a two-monitor desktop (3) Use the 'Adjustment' dialog (see 3.4) to adapt the display of the monitor connected to the Fire GL. 3.2 Setting a DualScreen Configuration --------------------------------------- NOTE: For settings in the DualScreen dialog you need the following: - Two monitors connected to the card - Both monitors switched on when you start your computer 1. - Windows NT 4.0: Select the 'DualScreen' dialog in the 'Display Properties' window. - Windows 2000/Windows XP: Select the DualScreen dialog via Display Properties > Settings > Advanced > DualScreen. Refer to the context sensitive online help for more information on setting up your 'DualScreen' configuration. 2. Select your Primary Monitor. The primary monitor is the left monitor or top monitor, respectively, of a multiple-monitor desktop. Monitor icon 1 is for the monitor connected to the VGA connector, monitor icon 2 is for the monitor connected to the DVI connector. 3. Select your Desktop Setup Select 'Disable Secondary Monitor' if you want to work in single-monitor mode with the primary monitor. Select 'Clone Mode' if you want the display of the primary monitor duplicated on the second monitor. Select 'Extended Desktop Horizontal' if you want to see the left section of your display on the primary monitor and the right section on the second monitor. Select 'Extended Desktop Vertical' if you want to see the upper section of your display on the primary monitor and the lower section on the second monitor. NOTE: The Extended Desktop settings will deselect the 'hiding modes that the computer cannot display' option in the Monitor panel. Do not reset this option manually if you have an Extended Desktop enabled. 4. Select the 'Window Placement' settings: Select 'Use HydraVision for Placement' to define your window placement with the HYDRAVISION(TM) desktop management software. NOTE: HYDRAVISION(TM) installation is an option of the video driver installation and may not be automatically installed on your system. 'Fullscreen' - Select if you want a full screen window displayed 'On all' monitors, or only on the 'Current monitor' - that is the monitor where your mouse cursor currently is. 'Windows' - Select how you want to display sizeable windows that normally appear in the middle of the screen: 'Unchanged', or 'Move'd fully to that monitor where the top left corner of the window is. 'Reports' - Select a monitor where you want to display Windows messages that normally display in the middle of the screen. This keeps the screen area of the other monitor free for your work. You may alternatively opt for displaying the reports 'Unchanged'. NOTE: These options are unavailable if 'Use HydraVision for Placement' is selected. 5. Click the 'Apply' or 'OK' button to enable your DualScreen settings. NOTES: (1) Both monitors will operate with the same resolution. Check the documentation of your monitors and make sure that each monitor supports your resolution and refresh rate setting. (2) The Settings dialog will display the corresponding DualScreen resolution. For example, 1024x768 is a single-screen resolution, using only one monitor. 2048x768 indicates the same resolution for 'Extended Desktop Horizontal' using both monitors, and 1024x1536 indicates the same resolution for 'Extended Desktop Vertical' using both monitors. 3.3 Selecting your Monitor --------------------------- Select the 'ATI Monitor' dialog in the 'Display Properties' window. (Windows 2000/Windows XP: via Display Properties > Settings > Advanced > ATI Monitor) NOTE: In Windows 2000/Windows XP the ATI Monitor dialog is not active - if you have only one monitor connected to the card - if you have disabled the secondary monitor in the DualScreen dialog. You can customize the settings of the connected monitor. For more information on setting up the monitors refer to the context sensitive online help. A. Set the desired operation mode for the selected monitor: Custom Modes ------------ Use resolution and refresh rates for this monitor as specified in the 'Settings' dialog in 'Display Properties.' This option allows you to take full advantage of the resolution/refresh rate capabilities of the video chip. WARNING! Selecting a resolution or refresh rate that your monitor does not support can permanently damage the monitor. Check the documentation of your monitor and make sure that the monitor supports the selected resolution and refresh rate. Select from list ---------------- Use resolution/refresh rate settings optimized for your specific monitor. Select your monitor from the displayed monitor list. To select your monitor, scroll to the manufacturer of your monitor and highlight the manufacturer in the list. Click on the '+' sign and select your monitor. A list on the right menu panel displays resolutions and - for each resolution - the maximum refresh rate, as supported by the selected monitor. If the current video mode (specified in the 'Settings' dialog) is not supported by the selected monitor, the resolution/ refresh rate setting will be automatically reduced. The 'Maximum Vertical Frequency' section displays the maximum refresh rate supported by the monitor for each resolution. Click the 'Apply' or 'OK' button to enable your monitor selection. If the list does not display your monitor type and you have a disk from the monitor manufacturer, use the 'Have Disk' button to import the monitor information to the internal monitor list. Click the 'Have Disk' button, insert the disk, and select the directory or file containing information about your monitor. Then select your monitor and click the 'Apply' or 'OK' button. NOTE: Click the 'Display Fire GL Monitor List' button to switch the displayed monitor list back from the manufacturer's disk to the internal monitor list. DDC Monitor ----------- Select this option and click the 'Apply' or 'OK' button if you want the driver to automatically decode the monitor's DDC information on each reboot/NT 4.0 start. To detect a new DDC monitor immediately, click the 'Detect now' button. An error message will be displayed if the connected monitor does not support DDC. Refresh Frequency ----------------- For Monitor 2 - the monitor connected to the DVI connector - only Select the desired refresh rate. All refresh rates supported by the monitor for the currently selected resolution are displayed. NOTE: Use the Settings or (Windows) Monitor dialogs of the Display Properties to set the refresh rate for Monitor 1 - the monitor connected to the VGA connector B. Click the 'Apply' or 'OK' button to enable your monitor settings. 3.4 Adjusting the Monitor Display ----------------------------------- Select the 'Adjustment' dialog in the 'Display Properties' window. (Windows 2000/Windows XP: via Display Properties > Settings > Advanced > Adjustment). Using this dialog you can adjust the display of the connected monitor(s). For more information on adjusting the monitors' display refer to the context sensitive online help. A. Monitor Tuning Monitor Tuning is available only for VGA monitors. If you have two monitors connected to the Fire GL 8800: - Monitor 1 is the monitor connected to the VGA connector - Monitor 2 is the VGA monitor connected to the DVI connector With the buttons in the 'Move' and 'Size' sections you can tune the position and size of the monitor's display for the indicated resolution and refresh rate. NOTES: (1) Use the hardware setting controls on your monitor, if available, to adjust your display size or position - instead of the software controls in 'Adjustment - Monitor Tuning.' Check the documentation of your monitor for information on your monitor's hardware controls. (2) Resizing the display slightly changes the actual refresh rate. If you operate a fixed-frequency monitor check the documentation of your monitor for information on refresh rate tolerances. Sync Polarity: If you do not get a satisfactory display with the default sync polarity setting for the current resolution, you may try and change the settings. Undo: Click this button to undo the last change you made (i.e. when you clicked 'Apply'). Default: Click this button to set the 'Monitor Tuning' to the manufacturer's default settings. NOTES: (1) Press the ESC key on your keyboard to undo the changes if your monitor has lost synchronization. (2) If you change the resolution (in 'Settings') and/or the refresh rate (in 'Monitor'), you may need to re-adjust the monitor's display. B. 'Gamma Correction': Adjust the montior's gamma correction for optimal brightness with the red, green and blue slider bars. The Gamma Correction Adjustment settings apply to both monitors, if you have two monitors connected to the Fire GL card. When these sliders are changed the gamma correction table modifies each pixel's color value. The brightness produced at the face of the display is proportional to the input voltage raised to the power gamma. This nonlinearity must be compensated to achieve correct reproduction of the image's brightness. The effect of display gamma is to darken the midtones relative to the dark and light regions. The gamma correction adjustment affects the entire screen display. The possible setting range is 0.3 - 4.0. The default setting is 1.0. With 'Link sliders' selected, the three sliders move together as you drag any individual slider. With the check box unchecked, you can adjust colors individually by dragging the applicable slider. Click the '>1<' button - for each color - to set the gamma correction to the default value of 1.0. C. Click the 'Apply' or 'OK' button to enable your adjustment settings. 4. UNINSTALLING THE Fire GL VIDEO DRIVER ----------------------------------------------------- This section describes how to properly remove the Fire GL software from your system should you need to do so. NOTE: Before removing the Fire GL video driver, please close all open application programs and disable any anti-virus software that is running on your computer until the driver de-installation is complete! To install or uninstall the Fire GL drivers, you need administrator rights or you must be logged on as a user with administrator rights under Windows. 1. From the 'Start' menu, click Start > Programs > ATI FGL 2. Click 'ATI FGL Install/Uninstall'. The 'ATI FGL Install' dialog appears. 3. Click 'Add/Remove component'. Select 'ATI Fire GL 8xxx Video Accelerator' and uncheck the checkbox Note: Make sure that only those components are unchecked that you want to remove now. (Click 'Back' and 'Add/Remove components' to select specific software components for removal.) 4. Click 'Next' to remove the Fire GL driver. 5. Follow further instructions displayed on your screen. 5. CONFIGURATION FEATURES AND INFORMATION ----------------------------------------- 5.1 Information Dialog ------------------------------ Check the 'Information' dialog in the 'Display Properties' window (Windows 2000/windows XP: via Display Properties > Settings > Advanced > Information) for detailed hardware and driver information on your Fire GL card. These data may be helpful when contacting TechSupport. You can display the 'Information' dialog by right-clicking the Windows Desktop background and then selecting the 'Properties' option from the pop-up menu. Windows Nt 4.0: Select the 'Information' tab. Windows 2000: Click 'Settings' > 'Advanced' and select the 'Information' tab. 5.2 Configuration Menu (for experienced users only!) ------------------------------------------------------------ If you experience problems with your application, or if you want to try to optimize the performance of your system on specific applications, you may modify the configuration settings. Select the 'Configuration' dialog in the 'Display Properties' window. (Windows 2000/Windows XP: via Display Properties > Settings > Advanced > Configuration) You can find more information on the settings in the 'Configuration' dialog in the context sensitive online help. You can display the 'Configuration' dialog by right-clicking the Windows Desktop background and then selecting the 'Properties' option from the shortcut menu. Windows Nt 4.0: Select the 'Configuration' tab. Windows 2000/Windows XP: Click 'Settings' > 'Advanced' and select the 'Configuration' tab. 1. Activating a configuration profile: For some of the most popular applications the optimal configuration profile is factory-set by default. Select the application from the list in the 'Configuration Profiles' section. This will change the necessary Windows registry settings. Click 'Apply' and if prompted, restart Windows. 2. Adding a new configuration profile: Click the 'Add' button in the 'Configuration Profiles' section and enter the new application for which you want to set the configuration parameters. 3. Modifying the configuration parameters: To change the configuration settings of a specific application, for example, CATIA, select the application from the list in the 'Configuration Profiles' section and click the 'Modify' button. To remove the selected configuration profile completely, click the 'Delete' button. 4. If you add or modify an application profile, select or clear the checkboxes in the 'Settings' section according to your requirements: - Enable 8-Bit double-buffered Overlay Planes Use 8 bits of each 32-bit frame buffer pixel as double-buffered overlay planes. - Force copy swap Force blit copy from back to front buffer. - Wait for vertical retrace Buffer swap 'synched' to vertical retrace. This improves the picture quality but reduces the view performance in, for example, benchmark testing. 5. Click the 'Apply' or 'OK' button to enable your Fire GL Configuration settings. 6. SERVICE, SUPPORT, AND SOFTWARE UPGRADES ------------------------------------------ Technical support for the installation and configuration of ATI FIre GL Professional Graphics Accelerators, as well as software updates or optional software packages, are available in the Internet at http://www.ati.com/support 7. SUPPORTED RESOLUTIONS, COLOR DEPTHS, AND REFRESH RATES ---------------------------------------------------------- The Fire GL accelerators supports HiColor, 16-bit modes and TrueColor, 32-bit (24 color, 8 alpha) modes. There is no support for 8-bit modes. Analog and digital monitors with 15-pin VGA connector - single monitor +==========+=============+=========================+==================+ |Resolution| Color Depth | Line Frequency | Refresh Rate | | | (Bits) | (kHz) | (Hz) | +----------+-------------+--------------------------------------------+ | 640x480 | 16 / 32 | 31.5, 37.5, 43.3, 56.9 | 60, 75, 85, 100 | +----------+-------------+-------------------------+------------------+ | 800x600 | 16 / 32 | 37.7, 46.9, 54.1, 63.9 | 60, 75, 85, 100 | +----------+-------------+-------------------------+------------------+ |1024x768 | 16 / 32 | 48.4, 60.0, 68.7, 80.8 | 60, 75, 85, 100 | +----------+-------------+-------------------------+------------------+ |1152x864 | 16 / 32 | 53.7, 67.7, 77.1, 91.5 | 60, 75, 85, 100 | +----------+-------------+-------------------------+------------------+ |1280x960 | 16 / 32 | 60.0, 75.1, 85.7, 101.7 | 60, 75, 85, 100 | +----------+-------------+-------------------------+------------------+ |1280x1024 | 16 / 32 | 64.0, 80.0, 91.1, 107.0 | 60, 75, 85, 100 | +----------+-------------+-------------------------+------------------+ |1600x1000 | 16 / 32 | 62.1, 78.3, 89.2, 105.9 | 60, 76, 85, 100 | +----------+-------------+-------------------------+------------------+ |1600x1024*| 16 / 32 | 63.6, 80.2, 81.3, 91.4 | 60, 75, 76, 85 | | | | 107.5 | 100 | +----------+-------------+-------------------------+------------------+ |1600x1200 | 16 / 32 | 75.0, 93.8, 106.3 | 60, 75, 85, 100 | +----------+-------------+-------------------------+------------------+ |1792x1344 | 16 / 32 | 83.6, 106.3, 119.9 | 60, 75, 85 | +----------+-------------+-------------------------+------------------+ |1920x1080 | 16 / 32 | 67.1, 84.6, 96.4, 114.4 | 60, 75, 85, 100 | | ** | | | | +----------+-------------+-------------------------+------------------+ |1920x1200*| 16 / 32 | 74.5, 94.0, 95.0, 107.1 | 60, 75, 76, 85 | | | | 127.1 | 100 | +----------+-------------+-------------------------+------------------+ |2048x1536 | 16 / 32 | 95.3, 120.2 | 60, 75 | +----------+-------------+-------------------------+------------------+ *: Wide Screen Aspect Ratio Mode (16:10) **: Wide Screen Aspect Ratio Mode (16:9) Digital monitors with DVI connector - single monitor +==========+=============+===============+ |Resolution| Color Depth | Refresh Rate | | | (Bits) | (Hz) | +----------+-------------+---------------+ | 640x480 | 16 / 32 | 60, 75 | +----------+-------------+---------------+ | 800x600 | 16 / 32 | 60, 75 | +----------+-------------+------- -------+ |1024x768 | 16 / 32 | 60, 75 | +----------+-------------+---------------+ |1152x864 | 16 / 32 | 60, 75 | +----------+-------------+---------------+ |1280x960 | 16 / 32 | 60, 75 | +----------+-------------+---------------+ |1280x1024 | 16 / 32 | 60, 75 | +----------+-------------+---------------+ |1600x1000 | 16 / 32 | 60 | +----------+-------------+---------------+ |1600x1024*| 16 / 32 | 60 | +----------+-------------+---------------+ |1600x1200 | 16 / 32 | 60 | +==========+=============+===============+ DualScreen - 2 monitors with VGA connector +==========+==================+=======================================+ |Resolution|Color Depth (Bits)| Refresh Rates (Hz) | +----------+------------------+--------------------+------------------+ | Dual | | Monitor 1 | Monitor 2 | +----------+------------------+--------------------+------------------+ | 640x480 | 16 / 32 | 60, 75, 85, 100 | 60, 75, 85, 100 | +----------+------------------+--------------------+------------------+ | 800x600 | 16 / 32 | 60, 75, 85, 100 | 60, 75, 85, 100 | +----------+------------------+--------------------+------------------+ |1024x768 | 16 / 32 | 60, 75, 85, 100 | 60, 75, 85, 100 | +----------+------------------+--------------------+------------------+ |1280x1024 | 16 / 32 | 60, 75, 85, 100 | 60, 75, 85 | +----------+------------------+--------------------+------------------+ |1600x1200 | 16 / 32 | 60, 75, 85, 100 | 60 | +==========+==================+====================+==================+ Monitor 1 is the monitor connected to the VGA connector Monitor 2 is the monitor connected to the DVI connector DualScreen 1 Monitor with VGA connector and 1 Monitor with DVI connector +==========+==================+=======================================+ |Resolution|Color Depth (Bits)| Refresh Rates (Hz) | +----------+------------------+--------------------+------------------+ | Dual | | Monitor 1 | Monitor 2 | +----------+------------------+--------------------+------------------+ | 640x480 | 16 / 32 | 60, 75, 85, 100 | 60, 75 | +----------+------------------+--------------------+------------------+ | 800x600 | 16 / 32 | 60, 75, 85, 100 | 60, 75 | +----------+------------------+--------------------+------------------+ |1024x768 | 16 / 32 | 60, 75, 85, 100 | 60, 75 | +----------+------------------+--------------------+------------------+ |1280x1024 | 16 / 32 | 60, 75, 85, 100 | 60, 75 | +----------+------------------+--------------------+------------------+ |1600x1200 | 16 / 32 | 60, 75, 85, 100 | 60 | +==========+==================+====================+==================+ Monitor 1 is the monitor connected to the VGA connector Monitor 2 is the monitor connected to the DVI connector --------------------------------------------------------------------------- --------------------------------------------------------------------------- All product names listed are trademarks or copyrights of their respective owners. --------------------------------------------------------------------- (c) Copyright 2001, by ATI Technologies Inc. All rights reserved ---------------------------------------------------------------------